Products

MD14-5 SDC2300 Quick adjustment using the slot in the hook and the velcro cuff makes this bungy cable suit the SDC2300. It connects to the shaft wi...

Universal hip stick This adjustable bungy strut has 6 different placement holes to adjust from 33 cm to 57 cm (13"- 22"). It is designed to go over...

67-90405 USB charging cable Application  This cable connects to the USB port in the BC10 battery charger base and the other end connects into the W...

3011-0368 EQUINOX magnetic charging cable to USB Application Charging cable for the Equinox series that magnetically connects to the control box an...

GPX6000ADAPT90DEG GPX6000 audio adaptor Application Adaptor cable for the GPX6000 to step up from the 3.5mm socket to a standard 6.25mm and allow c...

GPX6000ADAPTSTR GPX6000 audio adaptor Application Adaptor cable for the GPX6000 to step up from the 3.5mm socket to a standard 6.25mm and allow cur...

SDCADAPTOR This adaptor cable has a 1/4"female socket that locks the male jack in to keep it tight. A button allows for releasing it. The Detector ...

LQ15399-1 This is a standard style pick holder with a canvas backing and a webbing strap on the back to go over a 2" (50 mm) wide belt.

M03-0001 Here is a Coiltek brand Embriodered cap to keep the sun off and tell all who's products you support.

3011-0167 The Navy Blue Embroidered Minelab cap keeps the sun off. One size fits all with the adjustment band. Why don't you use yours as a stateme...

MDGPZBAG This is a full length padded carry bag is made for the Minelab GPZ 7000 detectors but will house other detectors as well. It will fit your...

3011-0277 This is a carry bag to suit the GPZ7000 Minelab metal detector. It is larger than the CTX3030 bag and replaces all the previous Minelab b...

3011-0257 Suitable for SDC 2300. Provides convenient transport and storage for your detecting essentials. This bag is approximately 400 mm x 200 mm...

Display Box Jarrah 15 pod Beautiful Jarrah wood display case to house 15 x 27 mm display pods (included) for your valuable nuggets or gems. Display...

CC003 Faith CC Picks manufacture their picks from one piece of spring steel. This eliminates weak welded joins which prospectors have found frustra...

3011-0210 Large connector Application The car charger plugs into a 12 Volt DC automotive cigarette lighter socket for convenient, mobile charging w...

3011-0235 Large connector Application Fits Excalibur series metal detectors (except the original Excalibur). Also fits older Sovereign, Musketeer a...

3011-0339 Charger to suit the GOLD MONSTER 1000, GPX600 and SDC2300 Lithium Ion batteries. Note: The output voltage of this adaptor is 12 volt. DO ...

3011-0169 GPX series Application The car charger plugs into a 12 Volt DC automotive cigarette lighter socket for convenient, mobile charging when a...

3011-0203 GPX series Application Universal voltage, fits all GPX series metal detectors. Use the correct adaptor plug for your country. This is a g...

3011-0290 BC10 and WM12 This is the cable kit to suit the BC10 charger for the GPZ7000 and the CTX3030 model detectors. The wireless module usb cab...

3011-0128 Charger Base   The battery charger base (BC10) is the item that the mains/12 volt input connects into and allows charging of the GPZ7000 ...

3011-0263 The SDC2300 mains charger (240V) can charge the 4 C size NiMh batteries at once, and has the capability to charge AA, AAA, D and 9 volt b...

T01-0009 These plastic push button snap locks are extremely difficult to find and we imported these. The plastic composition takes any metal away f...

3011-0427 GPX6000 17"Mono Coil This is the standard coil to suit the GPX6000 Minelab metal detector. The GPX 11" round Mono-loop coil is a great ge...

3011-0427 GPX6000 17"Mono Coil This is the currently largest coil to suit the GPX6000 Minelab metal detector. The GPX 17" x 13" elliptical Mono coi...

3011-0304 Minelab GPZ7000 accessory coil Application Suits the Minelab GPZ7000 only. Use when looking for deeper and larger nuggets in ground that ...

3011-0278 The Minelab GPZ7000 standard 14" x 13"  coil is available as a spare part. Suits the Minelab GPZ7000 only. This is a genuine Minelab spar...

3011-0148 Coil wear kit Contains bolts and shaft rubbers as per the image. This is a genuine Minelab spare part. Compatibility E-TRAC Safari Explor...

3011-0284 Coil wear kit Suits GPZ000 lower shaft. Consists of the rubber washers, bolts and nuts to attach the coil to the lower shaft. This is a g...

3011-0150 Coil wear kit Items in this kit is as per the image and includes shaft bolts, washers and velcro ties. Fits X-TERRA series metal detector...

C03-0005 The smallest size in the GOLD EXTREME series, this coil has high sensitivity to the small targets with good depth ability. This coil is a ...

C06-0008 The smallest size in the GOLDHAWK series, this coil has high sensitivity to the small targets with good depth ability. This coil is a grea...

C03-0006 This large round shaped GOLD EXTREME coil has excellent depth ability while still having good sensitivity for the smaller targets. Being l...