Products

C03-0007 This large elliptical Gold Extreme coil provides the best ground coverage in the series and maintains excellent depth and sensitivity. Lig...

C06-0009 9" round is a good sized small coil that suits the fans of round coils. Sensitive around the edges like all mono type coils, pinpointing i...

C05-0009 Gold Extreme Accessories Pack This accessories pack has all you need to fit our Gold Extreme coils to your Minelab SDC2300 detector. With ...

3011-0101 X-TERRA 18.75 kHz Application Suitable for X-TERRA series metal detectors (except X-TERRA 30). The standard X-TERRA 705 Gold Pack coil is...

 3011-0073  Please note - This coil is no longer a stock item with the advent of the range of aftermarket coils. We can order it in for you. Appli...

3011-0078 Please note - This coil is no longer a stock item with the advent of the range of aftermarket coils. We can order it in for you. Applica...

3011-0115 CTX3030 11" Application The waterproof 11 inch Double-D coil provides good depth and sensitivity for treasure hunting. This is the stanar...

3011-0116 CTX3030 17" Application The waterproof 17 × 13-inch elliptical Double-D coil provides maximum depth for specialised treasure hunting. It ...

3011-0114 CTX3030 6" Some operators are using this coil in trashy areas because the size of it allows for fewer targets under the coil and more acc...

3011-0335 EQUINOX 15" x 12" Some operators are using this coil because the size of it allows for faster ground coverage and better penetration (dep...

3011-0333 EQUINOX 6" Some operators are using this coil in trashy areas because the size of it allows for fewer targets under the coil and more acc...

3011-0168 FBS detectors control box cover. This custom cover is an excellent way to protect your detector from harsh environmental conditions such ...

SBGPZCBC This is a GPZ7000 cover kit. It consists of a control box cover with a rubber sole, a zippered pocket for storage of your ferrite and find...

SSDC/CBC This Shingleback control box cover fits the SDC nicely and has flaps over the on/off/selector switches and also the headphone connector po...

3011-0292 Crossbar kit This is the crossbar kit to suit the GPZ7000 detector. It can be used with the PRO-SWING 45 harness to make it the same as t...

Cru0.5kg This is a graphite crucible of 0.5 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces lik...

Cru1kg This is a graphite crucible of 1 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces like gas. ...

Cru2kg This is a graphite crucible of 2 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces like gas. ...

Crufl1.0 Graphite crucible to suit the flame type furnaces1000 gram capacity Dimensions Body diameter - 80 mmTotal length - 94 mm

Crufl2.0 Graphite crucible to suit the flame type furnaces2000 gram capacity Dimensions Body diameter - 94 mmTotal length - 100 mm

Crufl250g Graphite crucible to suit the flame type furnaces 250 gram capacity Dimensions Body diameter - 47 mmTotal length - 54 mm  

Crufl500 Graphite crucible to suit the flame type furnaces500 gram capacity Dimensions Body diameter - 60 mmTotal length - 67 mm

Crucible large The largest crucible we stock has a capacity of up to 1Kg of gold. This is suited to large quantities of gold up to 1kg, or precious...

Crucible medium This medium crucible has a capacity of up to 300grams of gold. Suited to melting of larger quantities of gold or precious metal. Di...

Crucible small This small crucible has a capacity of up to 100 grams of gold. Ideal for melting small quantities of gold or other precious metal. D...

Curlycable This male/male 90 degree end extension curly cord is used to connect between the adaptor cable for an SDC2300 to give enough length to a...

3011-0192 GPX series Genuine Minelab brand 5 pin curly cord to suit GPX series detectors 4000, 4500 and 5000, 3 metres in length.

3011-0207 SD/GP series Minelab brand 4 pin 3 metre Curly cord to suit SD2000, 2100, 2200, GP Extreme, 3000, 3500. This is a genuine Minelab spare p...

1626200 Edge Digger LAST ONE The Garrett edge digger was designed to aid in the recovery of coin and treasure targets from difficult places. The se...

3011-0400 EQUINOX Shaft Kit This shaft kit is a replacement for the EQUINOX 600 and 800 detectors with the benefit that it will fit onto the Minela...

EZY004 EZYDIG Mini This pick was designed to suit the SDC2300. It is light and all steel construction at 915 grams in weight, has a rubber hand gri...