Products

MD16 Made by Double D Leather, this is an angled pick holder that slides onto a belt. The holder houses the pick at an angle to reduce the trip haz...

MD17 This is an angled pick holder that clips over or onto a harness. The later Minelab harness with the padded waist belt stops the clips digging ...

3011-0283 The GPZ7000 armrest kit contains the GPZ7000 armrest and straps, the lower foot and 2 x fixing screws to attach it. This is a genuine Min...

GPZAC GPZ7000 armrest cover. This neoprene cover is designed to fit the GPZ7000 armrest and still utilise the velcro arm straps. It fits over the a...

3011-0402 SDC Armrest cover Does the SDC2300 armrest on your detector fold in when you go to put your arm into it? Does it fold in when you wera a ...

3011-0143 Armrest ears Application Pair of aluminium ears that go onto the shaft to fit Eureka Gold, SD, GP, GPX and Sovereign series metal detecto...

3011-0144 Armrest wear kit Application   Neoprene sleeve, velcro strap set and bolts to fit Eureka Gold, GPX, and Sovereign series metal detectors....

ATX packages Note: This metal detector will be posted with a signature delivery sticker. A signature is required at delivery, and proof of identif...

3011-0202 Minelab harness The GP style harness pictured has been replaced by the GPX5000 unit which has a 120mm wide padded belt, that goes around ...

3011-0245 Pro-Swing harness Designed for ultimate convenience and functionality. Minelab’s innovative W8 distribution system and specialist feature...

3011-0117 Lithium Ion battery 7.2v 34Wh This is a standard Minelab replacement battery to suit the CTX3030 detectors. This battery can be used on t...

3011-0209 FBS series 1800mAh replacement Minelab battery. Application. Fits FBS series metal detectors, Safari, Explorer SE pro and E-TRAC. Compati...

3011-0217 NiMH Battery Fits Excalibur series metal detectors (except the original Excalibur). Clips onto the detector and connects via the cable. T...

B01-0008 This Coiltek 6 volt battery is the 15aH dome top gell cell that was standard issue for the GP series detectors and previous units. Older S...

3011-0359 GOLD MONSTER 1000 Replacement or spare battery to suit the GOLD MONSTER 1000 detector. This is a lithium Ion battery pack as per the stan...

3011-0227 GPX series battery Replacement battery for the GPX range of detectors. Application Fits GPX series metal detectors. Compatible Metal Dete...

3011-0279 GPZ7000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPZ7000. This is a genuine Minelab spare...

3011-0432 GPX6000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPX6000. Item detail is for one battery....

UG001 SDC2300 Lithium Battery Kit The 3.0 amp 4 slot fast charger will recharge the supplied 3500 mAh cells in 2+ hours and these will give you 11 ...

 3011-0404 SDC2300 L/I battery pack Replacement or spare Lithium Ion Minelab batteries pack to suit the newer SDC2300 detectors. This battery pack ...

 3011-0302 SDC2300 batteries Replacement or spare NiMh Minelab batteries (4) to suit the SDC2300 detectors. The positive terminal on these batterie...

3011-0117 AA battery holder This is a Minelab replacement battery holder to suit the CTX3030 detectors. Application Forgotten to charge your batter...

3011-0170 AA battery holder FBS Battery holder to suit AA batteries as a spare or emergency replacement for the detectors below. Application Fits F...

3011-0171 AA battery holder Eureka Gold Application Fits Sovereign GT and Eureka Gold. Also fits Sovereign Elite and Musketeer Advantage. Compatibl...