Cables

67-90405 USB charging cable Application  This cable connects to the USB port in the BC10 battery charger base and the other end connects into the W...

3011-0368 EQUINOX magnetic charging cable to USB Application Charging cable for the Equinox series that magnetically connects to the control box an...

GPX6000ADAPT90DEG GPX6000 audio adaptor Application Adaptor cable for the GPX6000 to step up from the 3.5mm socket to a standard 6.25mm and allow c...

GPX6000ADAPTSTR GPX6000 audio adaptor Application Adaptor cable for the GPX6000 to step up from the 3.5mm socket to a standard 6.25mm and allow cur...

SDCADAPTOR This adaptor cable has a 1/4"female socket that locks the male jack in to keep it tight. A button allows for releasing it. The Detector ...

0302-0082 12 volt charger Issued to suit the CTX3030 and GPZ7000 charger bases, this adaptor will also suit the Gold Monster 1000 and both SDC2300 ...

3011-0366 12 Volt alligator clip set to round connector to allow charging directly from a 12 volt battery and eliminating any potential issues with...

3011-0210 Large connector Application The car charger plugs into a 12 Volt DC automotive cigarette lighter socket for convenient, mobile charging w...

3011-0339 Charger to suit the GOLD MONSTER 1000, GPX600 and SDC2300 Lithium Ion batteries. Note: The output voltage of this adaptor is 12 volt. DO ...

124329 This is the 12 volt mains charger with 5 pins to suit the GPX series detectors, which is an alternative to the discontinued Minelab product....

3011-0203 GPX series Application These are sold out and no longer available from Minelab, but there is a replacement available HERE

125077 Here is an alternative to the Minelab charger which has been discontinued. These are a direct replacement for the 240 volt unit and have the...

3011-0290 BC10 and WM12 This is the cable kit to suit the BC10 charger for the GPZ7000 and the CTX3030 model detectors. The wireless module usb cab...

3011-0128 Charger Base   The battery charger base (BC10) is the item that the mains/12 volt input connects into and allows charging of the GPZ7000 ...

3011-0218 Application Fits GP & SD series metal detectors to charge the gel cell batteries via a 12 volt outlet. The power cable from the machi...

B05-0003 Now available as an aftermarket accessory after they were made obsolete. The Coiltek chargers has the connector which is able to plug dire...

3011-0263 The SDC2300 mains charger (240V) can charge the 4 C size NiMh batteries at once, and has the capability to charge AA, AAA, D and 9 volt b...

Curlycable This male/male 90 degree end extension curly cord is used to connect between the adaptor cable for an SDC2300 to give enough length to a...

3011-0207 SD/GP series This item is no longer available as a Minelab part. We are working on an alternative for it.

cabstrgpx1.7 Since the Minelab curly cords were discontinued, this straight cable is an alternative. 1.7 metres long and straight, it suits the 5 p...