Coiltek

B01-0007 This Coiltek 6 volt battery is the 15aH dome top gell cell that was standard issue for the GP series detectors and previous units. Older S...

N01-0002 Black or white depending on supply Heavy duty coil bolt for larger coils. 8 mm in diameter x 50 mm long. If your larger coil has trouble s...

M03-0001 Here is a Coiltek brand Embriodered cap to keep the sun off and tell all who's products you support.

B05-0003 Now available as an aftermarket accessory after they were made obsolete. The Coiltek chargers has the connector which is able to plug dire...

C04-0016 To suit all CTX3030 Detectors Coil Type: Elliptical DD Utilising the Minelab CTX technology this coil is fully approved and tested to the ...

C03-0005 The smallest size in the GOLD EXTREME series, this coil has high sensitivity to the small targets with good depth ability. This coils is a...

C03-0006 This large round shaped GOLD EXTREME coil has excellent depth ability while still having good sensitivity for the smaller targets. Being l...

C01-0021 11" Elite The ELITE coils utilise a new winding innovation which was created and released by COILTEK. The winding optimises the transmit ...

 C01-0020 14" Elite The ELITE coils utilise a new winding innovation which was created and released by COILTEK. The winding optimises the transmit ...

C04-0017 To suit all CTX3030 Detectors Coil Type: Elliptical DD This new open web elliptical coil is an exciting addition for the CTX3030 detector....

C03-0007 This large elliptical Gold Extreme coil provides the best ground coverage in the series and maintains excellent depth and sensitivity. Lig...

C02-0014 14" x 9" Elite The ELITE coils utilise a new winding innovation which was created and released by COILTEK. The winding optimises the trans...

C02-0020 17" x 11" Elite The ELITE coils utilise a new winding innovation which was created and released by COILTEK. The winding optimises the tra...

C01-0022 18" Elite The ELITE coils utilise a new winding innovation which was created and released by COILTEK. The winding optimises the transmit a...

C01-0002 9" Elite The ELITE coils utilise a new winding innovation which was created and released by COILTEK. The winding optimises the transmit...

C05-0009 Gold Extreme Accessories Pack This accessories pack has all you need to fit our Gold Extreme coils to your Minelab SDC2300 detector. With ...

M06-0001 This Coiltek Manufacturing control box cover comes in Camo colouration and is to protect your valuable detector's control box against abra...

B03-0001 GPX series Coiltek 5 pin curly cord for GPX series detectors 4000, 4500 and 5000, 3 metres in length.

S01-0001 Replacement Coiltek skidplate to suit their 10" x 5" Gold Extreme SDC2300 coil. This is a genuine Coiltek spare part.

S01-0002 Replacement Coiltek skidplate to suit their 11" Gold Extreme SDC2300 coil. This is a genuine Coiltek spare part.

S03-0002 Replacement Coiltek skidplate to suit their 11" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.

S03-0003 Replacement Coiltek skidplate to suit their 14" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.

S01-0012 Replacement Coiltek skidplate to suit their 14" x 9" Gold Extreme SDC2300 coil. This is a genuine Coiltek spare part.

S03-0008 Replacement Coiltek skidplate to suit their 14" x 9" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.