Shaft Related

3011-0283 The GPZ7000 armrest kit contains the GPZ7000 armrest and straps, the lower foot and 2 x fixing screws to attach it. The armrest and strap...

GPZAC GPZ7000 armrest cover. This neoprene cover is designed to fit the GPZ7000 and GPX6000 armrest, and still utilise the velcro arm straps. It fi...

3011-0402 SDC Armrest cover Does the SDC2300 armrest on your detector fold in when you go to put your arm into it? Does it fold in when you wera a ...

3011-0143 Armrest ears Application Pair of aluminium ears that go onto the shaft to fit Eureka Gold, SD, GP, GPX and Sovereign series metal detecto...

3011-0147 This is a replacement armrest and strap to suit the E-TRAC, Explorer and Safari detectors. This is a genuine Minelab spare part.

3011-0363 This kit contains the Gold Monster armrest and 4 clamps, the lower shaft adaptor and a battery pack for AA batteries. This is a genuine M...

3011-0144 Armrest wear kit Neoprene sleeve, velcro strap set and bolts to fit Eureka Gold, GPX, and Sovereign series metal detectors. This is a gen...

8008-0056 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on a GPZ7000 when the lever is pushed home. The...

8008-0062 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on an SDC2300 when the lever is pushed home. Th...

N01-0002 Black or white depending on supply Heavy duty coil bolt for larger coils. 8 mm in diameter x 50 mm long. If your larger coil has trouble s...

3011-0029 Black plastic bolt 2" long x 1/4" diameter. Suits Minelab coils and others. This is a genuine Minelab spare part.

Universal hip stick This adjustable bungy strut has 6 different placement holes to adjust from 33 cm to 57 cm (13"- 22"). It is designed to go over...

8005-0112 Clamp to suit centre shaft lock nut for the GPX6000. This is a genuine Minelab product.

8005-0111 Clamp to suit upper shaft lock nut for the GPX6000. This is a genuine Minelab product.

T01-0009 These plastic push button snap locks are extremely difficult to find and we imported these. The plastic composition takes any metal away f...

3011-0148 Coil wear kit Contains bolts and shaft rubbers as per the image. This is a genuine Minelab spare part. Compatibility E-TRAC Safari Explor...

3011-0284 Coil wear kit Suits GPZ000 lower shaft. Consists of the rubber washers, bolts and nuts to attach the coil to the lower shaft. This is a g...

3011-0141 Coil wear kit Application Spare parts kit with rubbers, bolts and velcro ties, fits all Minelab metal detectors EXCEPT X-TERRA and FBS se...

3011-0150 Coil wear kit Items in this kit is as per the image and includes shaft bolts, washers and velcro ties. Fits X-TERRA series metal detector...

We have a folding flip stand to fit the SDC2300 detectors and when folded outwards, keeps the detector from toppling over on uneven surfaces with t...

8005-0001 Foam sleeve Foam handle sleeve replacement slides over the handle. This is a genuine Minelab spare part. Compatibility Fits all Minelab m...

2008-0005 This is the foot only that is included in the Armrest Kit for the GPZ7000 HERE. The foot, or stand goes below the control box for it to s...

0703-0294 This is the GA10 guide arm retaining clip that hooks into the detector hand-piece to keep the guide arm in place when not in use. It slid...

3011-0294 GA10 attachment kit This is the attachment kit to suit the GA10 guide arm, released with the GPZ7000. The kit contains the plastic attach...

0703-0292 This is the flexible GA10 guide arm attachment piece that comes with the GPZ7000 metal detector. This is the attachment only. The full ki...

3011-0436 GA10 Minelab guide arm that is original equipment with the GPZ7000 metal detector, now suits the GPX6000 as it has an additional adaptor ...

8005-0090 The rubber strap that holds the GA10 guide arm flexible bracket is here. This is a genuine Minelab spare part.

AC001Z GPZ7000 Swing Arm This guide arm or swing arm is designed to fit onto the GPZ7000 shaft and allow 2 handed operation of the detector. This c...

AC001X SD/GP/GPX swing arm This guide arm or swing arm is designed to fit onto the SD, GP or GPX series upper shaft and allow 2 handed operation of...

AC001C SDC2300 Swing Arm This guide arm or swing arm is designed to fit onto the SDC2300 shaft and allow 2 handed operation of the detector. This c...

3011-0216 Application Fits GP 3500 and GPX series metal detectors. The switch and loom assembly is available separately HERE. This is a genuine Min...

woodhandle Application Replacement wooden handle for the troublesome plastic original. Uses the existing hardware to attach it, and the original sw...

Replacement handle Application This handle is 3d printed and very tough. The stem is now carbon fibre for a very strong application. It comes with ...

4002-0059 Centre or middle shaft lock nut to suit the GPX6000. This is a genuine Minelab product.

4002-0058 Upper shaft lock nut to suit the GPX6000. This is a genuine Minelab product.

3011-0027 Standard Minelab lower shaft washers. Suit - SD/GP/GPX shafts. This is a genuine Minelab spare part.

3011-0403 SDC2300 knuckle guard Minelab have produced a coil knuckle protector to prevent wear from the area that the coil swivels at. These are a ...

3011-0282Replacement intermediate (centre) carbon fibre shaft to suit the GPZ7000 metal detector.This is a genuine Minelab spare part.

3011-0130Replacement carbon fibre lower shaft to suit the CTX3030 metal detector. Good to fit to an extra coil for quick changes or as a spare.This...

3011-0401Replacement lower shaft to suit the EQUINOX series metal detectors. Does NOT include lower rubbers.This is a genuine Minelab spare part.

3011-0291 Replacement lower shaft to suit the GPZ7000 metal detector. Includes the rubber washers and bolts. This is a genuine Minelab spare part.

3011-0433 This is the standard Minelab lower shaft that suits the GPX6000 detectors. This can also be used as a lower shaft for the Equinox 700 and...

3011-0172 This is the standard Minelab lower shaft that suits the SD, GP and GPX range of detectors. This is a genuine Minelab spare part. Please n...

3011-0173 Short Fits all X-TERRA Series Detectors. Short version to reduce the maximum detector length. This is a genuine Minelab spare part.

3011-0400 EQUINOX 600/800 Shaft Kit This shaft kit is a replacement for the EQUINOX 600 and 800 detectors with the benefit that it will fit onto th...

3011-0434 GPX6000 Shaft Kit This shaft kit is a replacement for the GPX6000 detectors as standard issue. This is a genuine Minelab spare part. Plea...

8005-0040 Armrest strap 38 mm wide Application  This is the velcro strap to fit many of the Minelab detector armrests and is 38 mm in width. It vel...

8005-0019 Armrest straps Generic armrest straps to suit the earlier Minelab detectors that have a stud lock on one end and a velcro strip at the ot...