Products

3011-0361 EQUINOX standard 10" x 6" coil skidplate to suit the GOLD MONSTER 1000 that is an accessory coil as standard in the package. This is a ge...

3011-0360 EQUINOX standard 5" coil skidplate to suit the GOLD MONSTER 1000 that is an accessory coil as standard in the package. This is a genuine ...

Skidgpz12HD This skidplate is for the GPZ7000 12" coil only. This is a Nuggetfinder Heavy Duty skidplate to suit the GPZ7000 standard 12" coil. It ...

GPZ12STD This skidplate is for the GPZ7000 12" coil only. This is a Nuggetfinder standard skidplate to suit the GPZ7000 standard 12" coil. It is a ...

GPZ14HD This is the Nuggetfinder skidplate to suit the GPZ7000 standard 14" x 13" coil. It is a tape on type skidplate and therefore has the benefi...

GPZ19std This is the Nuggetfinder full skidplate to suit the GPZ7000 19" coil to stop/minimise it catching on sticks and rocks etc., when it is bei...

3011-0286 Minelab white skidplate as a replacement for the GPZ7000. This is the standard issue item as per original. This is a genuine Minelab spar...

Skid12evHD This skidplate is for the Evolution coil and will NOT fit the GPZ7000 12" coil. Heavy duty standard skidplate to suit the following coil...

Skid12evstd This skidplate is for the Evolution coil and will NOT fit the GPZ7000 12" coil. Grey standard skidplate to suit the following coil. Sui...

Skid12x8evHD Heavy duty standard skidplate to suit the following coil. Suits 12" x 8" round Evolution series in the heavy duty version. The heav...

Skid12x8evstd Grey standard skidplate to suit the following coil. Suits 12" x 8" elliptical Evolution series standard grey skid.

Skid14x9evHD . Heavy duty standard skidplate to suit the following coil. Suits 14" x 9" round Evolution series in the heavy duty version. The heav...

Skid15evHDo/c Heavy duty standard skidplate to suit the following coil. Suits 15" round Evolution series in the heavy duty version. The heavy duty...

Skid15evstd0/c Grey standard skidplate to suit the following coil. Suits 15" round Evolution series coil Please select the skidplate type you requi...

Skid17x13evHDo/c Heavy duty standard skidplate to suit the following coil. Suits 17" x 13" round Evolution series in the heavy duty version.  Th...

Grey standard skidplate to suit the following coil. Suits 17" x 13" elliptical Evolution series coil. Please select the skidplate type you require ...

Skid19evHD Heavy duty standard skidplate to suit the following coil. Suits 19" round Evolution series in the heavy duty version. The heavy duty v...

GPZ17HD Heavy duty Nuggetfinder 17" x 13" Z Search skidplate to suit their GPZ700 coil. Heavy duty skids generally last up to two times as long as ...

Xceed12x7skid Heavy duty black skidplate for the Nuggetfinder Xceed 12' x 7" coil to suit the GPX6000 detector. Heavy duty skids generally last up ...

3011-0254 Skidplate Suits the SDC2300 8" mono coil. This is a genuine Minelab spare part.

GBS1 Sniffer bottle These squeezable bottles are used to suck up the gold from your pan, or to wash away the black sands and other debris as you pa...

AC004 This is an acoustic reflector for the sound coming from the inbuilt speaker on an SDC2300. It helps direct the sound upward and towards the o...

SPK Single or double This GME external speaker has a correctly wired jack to trigger the inbuilt booster in a GPX 4500/5000 battery, or is used in ...

8005-0040 Armrest strap 38 mm wide Application  This is the velcro strap to fit many of the Minelab detector armrests and is 38 mm in width. It vel...

8005-0019 Armrest straps Generic armrest straps to suit the earlier Minelab detectors that have a stud lock on one end and a velcro strip at the ot...

ST Suction tweezer This suction tweezer is used to assist in picking up the very fine gold from a panning operation. Squeeze the bulb end and relea...

9511-0102 Has your ground balance switch died or the green button top piece fallen off. This is the part to replace that. It pushes into the handle...

M07-0001 white M07-0002 black This is the standard style tape to hold the coil skidplate on in your choice of black or white. Thinner coils such as...

EVO tape Tape to hold the coil skidplate on in the Evolution series of Nuggetfinder coils. This tape is thinner so that it doesn't pucker up around...

1612900 Treasure pouch This is the pouch only. ACCESSORIES SHOWN ARE FOR DEMONSTRATION PURPOSES AND ARE NOT INCLUDED. Great for carrying your treas...

8008-0002 Upper shaft twist lock kit to repair Minelab shafts. This takes the play out of the shaft join when it is tightened. Once assembled, the ...

TygerBlade The Tyger Blade is made from 3mm stainless steel. Large palm plate that allows 2 handed precision plug digging. Media blasted to give a ...

TygerCub Made from Stainless Steel then Tig Welded with Laser Cut serrations.Designed with a large palm plate that allows the operator to place the...

TygerDigger Made from Stainless Steel, Tig Welded, Laser Cut serrations.Designed with a large foot plate that allows the operator to place their bo...

TygerSnake Made from Stainless Steel, Tig Welded, Laser Cut serrations.Designed with a large T-handle that allows the operator to place their body ...

0703-0227 Clip on holder and clip assembly that attaches to the rear of the WM12 wireless module to allow it to clip onto a strap, harness etc. Thi...

3011-0281 WM12 wireless module Suits the GPZ7000 as a replacement for a lost or damaged unit, as a spare for your detector, or alternatively can be...