Products

3011-0074 Please note - This coil is no longer a stock item with the advent of the range of aftermarket coils. We can order it in for you. Applica...

3011-0072  Please note - This coil is no longer a stock item with the advent of the range of aftermarket coils. We can order it in for you. Applic...

3011-0098 Please note - This coil is no longer a stock item. We can order it in for you. Standard issue coil with the X-TERRA range of detectors (...

3011-0115 CTX3030 11" Application The waterproof 11 inch Double-D coil provides good depth and sensitivity for treasure hunting. This is the stanar...

3011-0116 CTX3030 17" Application The waterproof 17 × 13-inch elliptical Double-D coil provides maximum depth for specialised treasure hunting. It ...

3011-0114 CTX3030 6" Some operators are using this coil in trashy areas because the size of it allows for fewer targets under the coil and more acc...

3011-0335 EQUINOX 15" x 12" Some operators are using this coil because the size of it allows for faster ground coverage and better penetration (dep...

3011-0333 EQUINOX 6" Some operators are using this coil in trashy areas because the size of it allows for fewer targets under the coil and more acc...

M06-0001 This Coiltek Manufacturing control box cover comes in Camo colouration and is to protect your valuable detector's control box against abra...

3011-0168 FBS detectors control box cover. This custom cover is an excellent way to protect your detector from harsh environmental conditions such ...

SBGPZCBC This is a GPZ7000 cover kit. It consists of a control box cover with a rubber sole, a zippered pocket for storage of your ferrite and find...

MD003.5 This is a control box cover to suit the SDC2300. It has velcro straps to secure it to the detector, a flap over the on/off and selector swi...

SSDC/CBC This Shingleback control box cover fits the SDC nicely and has flaps over the on/off/selector switches and also the headphone connector po...

3011-0292 Crossbar kit This is the crossbar kit to suit the GPZ7000 detector. It can be used with the PRO-SWING 45 harness to make it the same as t...

Cru0.5kg This is a graphite crucible of 0.5 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces lik...

Cru1kg This is a graphite crucible of 1 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces like gas. ...

Cru2kg This is a graphite crucible of 2 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces like gas. ...

Cru3kg This is a graphite crucible of 3 kgs capacity of gold to fit many electric furnaces. This is NOT suitable for flame type furnaces like gas. ...

Crufl1.0 Graphite crucible to suit the flame type furnaces1000 gram capacity Dimensions Body diameter - 80 mmTotal length - 94 mm

Crufl2.0 Graphite crucible to suit the flame type furnaces2000 gram capacity Dimensions Body diameter - 94 mmTotal length - 100 mm

Crufl250g Graphite crucible to suit the flame type furnaces 250 gram capacity Dimensions Body diameter - 47 mmTotal length - 54 mm  

Crufl500 Graphite crucible to suit the flame type furnaces500 gram capacity Dimensions Body diameter - 60 mmTotal length - 67 mm

Crucible large The largest crucible we stock has a capacity of up to 1Kg of gold. This is suited to large quantities of gold up to 1kg, or precious...

Crucible medium This medium crucible has a capacity of up to 300grams of gold. Suited to melting of larger quantities of gold or precious metal. Di...

Crucible small This small crucible has a capacity of up to 100 grams of gold. Ideal for melting small quantities of gold or other precious metal. D...

3228-0101 CTX3030 The Future of Discovery is here. Note: This metal detector will be posted with a signature delivery sticker. A signature is requi...

Curlycable This male/male 90 degree end extension curly cord is used to connect between the adaptor cable for an SDC2300 to give enough length to a...

3011-0192 GPX series Genuine Minelab brand 5 pin curly cord to suit GPX series detectors 4000, 4500 and 5000, 3 metres in length.

3011-0207 SD/GP series Minelab brand 4 pin 3 metre Curly cord to suit SD2000, 2100, 2200, GP Extreme, 3000, 3500. This is a genuine Minelab spare p...

1626200 Edge Digger LAST ONE The Garrett edge digger was designed to aid in the recovery of coin and treasure targets from difficult places. The se...

3011-0400 EQUINOX Shaft Kit This shaft kit is a replacement for the EQUINOX 600 and 800 detectors with the benefit that it will fit onto the Minela...

3303-0124 EXCALIBUR II We can order this item in for you. The World’s Best Water Detector! Thanks to a unique method of ground cancelling never ag...

EZY004 EZYDIG Mini This pick was designed to suit the SDC2300. It is light and all steel construction at 915 grams in weight, has a rubber hand gri...

EZY005 EZYDIG Mini Long This pick was designed as a slightly longer item to suit the SDC2300. It is light and all steel construction at 1000 grams ...

EZY003 EZYDIG Small This EZYDIG pick is the budget range of the CC Picks products. They feature a Bisalloy head for long life. Features handle leng...

Ferrite 3011-0301 This is a ground balancing aid for the GPZ7000 detector. It is a measured amount of ferrite to allow the detector to ground balan...

We have a folding flip stand to fit the SDC2300 detectors and when folded outwards, keeps the detector from toppling over on uneven surfaces with t...

8005-0001 Foam sleeve Foam handle sleeve replacement slides over the handle. This is a genuine Minelab spare part. Compatibility Fits all Minelab m...

2008-0005 This is the foot only that is included in the Armrest Kit for the GPZ7000 HERE. The foot, or stand goes below the control box for it to s...

0703-0294 This is the GA10 guide arm retaining clip that hooks into the detector hand-piece to keep the guide arm in place when not in use. It slid...

3011-0294 GA10 attachment kit This is the attachment kit to suit the GA10 guide arm, released with the GPZ7000. The kit contains the plastic attach...

0703-0292 This is the flexible GA10 guide arm attachment piece that comes with the GPZ7000 metal detector. This is the attachment only. The full ki...

3011-0436 GA10 Minelab guide arm that is original equipment with the GPZ7000 metal detector, now suits the GPX6000 as it has an additional adaptor ...

8005-0090 The rubber strap that holds the GA10 guide arm flexible bracket is here. This is a genuine Minelab spare part.