Products

GPZ14HD This is the Nuggetfinder skidplate to suit the GPZ7000 standard 14" x 13" coil. It is a tape on type skidplate and therefore has the benefi...

GPZ19std This is the Nuggetfinder full skidplate to suit the GPZ7000 19" coil to stop/minimise it catching on sticks and rocks etc., when it is bei...

3011-0286 Minelab white skidplate as a replacement for the GPZ7000. This is the standard issue item as per original. This is a genuine Minelab spar...

Skid12evHD This skidplate is for the Evolution coil and will NOT fit the GPZ7000 12" coil. Heavy duty standard skidplate to suit the following coil...

Skid12evstd This skidplate is for the Evolution coil and will NOT fit the GPZ7000 12" coil. Grey standard skidplate to suit the following coil. Sui...

Skid12x8evHD Heavy duty standard skidplate to suit the following coil. Suits 12" x 8" round Evolution series in the heavy duty version. The heav...

Skid12x8evstd Grey standard skidplate to suit the following coil. Suits 12" x 8" elliptical Evolution series standard grey skid.

Skid14x9evHD . Heavy duty standard skidplate to suit the following coil. Suits 14" x 9" round Evolution series in the heavy duty version. The heav...

Skid15evHDo/c Heavy duty standard skidplate to suit the following coil. Suits 15" round Evolution series in the heavy duty version. The heavy duty...

Skid15evstd0/c Grey standard skidplate to suit the following coil. Suits 15" round Evolution series coil Please select the skidplate type you requi...

Skid17x13evHDo/c Heavy duty standard skidplate to suit the following coil. Suits 17" x 13" round Evolution series in the heavy duty version.  Th...

Grey standard skidplate to suit the following coil. Suits 17" x 13" elliptical Evolution series coil. Please select the skidplate type you require ...

Skid19evHD Heavy duty standard skidplate to suit the following coil. Suits 19" round Evolution series in the heavy duty version. The heavy duty v...

GPZ17HD Heavy duty Nuggetfinder 17" x 13" Z Search skidplate to suit their GPZ700 coil. Heavy duty skids generally last up to two times as long as ...

Xceed12x7skid Heavy Duty black skidplate for the Nuggetfinder Xceed 12' x 7" coil to suit the GPX6000 detector. Compatibility GPX6000 Xceed coil

3011-0254 Skidplate Suits the SDC2300 8" mono coil. This is a genuine Minelab spare part.

Camo snake guards Snake Guards are a light weight insurance against snake bite, with protection up to just below the knee and around/over your leat...

Snake guards universal fit Gaiters with front rubber protection Original ultra light weight gaiter for protection against snakes and other unwanted...

GP3 Sniffer bottle These squeezable bottles are used to suck up the gold from your pan, or to wash away the black sands and other debris as you pan...

AC004 This is an acoustic reflector for the sound coming from the inbuilt speaker on an SDC2300. It helps direct the sound upward and towards the o...

SPK Single or double This GME external speaker has a correctly wired jack to trigger the inbuilt booster in a GPX 4500/5000 battery, or is used in ...

GM2stand This stand/scoop holder is a 3D printed unit done in house from ASA filament which is more UV and heat resistant than other filaments. The...

cabstrgpx1.7 Since the Minelab curly cords were discontinued, this straight cable is an alternative. 1.7 metres long and straight, it suits the 5 p...

8005-0040 Armrest strap 38 mm wide Application  This is the velcro strap to fit many of the Minelab detector armrests and is 38 mm in width. It vel...