Handle - SD, GP and GPX

Replacement handle

Application

This handle is 3d printed and very tough. The stem is now carbon fibre for a very strong application. It comes with a plug for the top hole if you are using it on the Minelab detectors without a ground balance switch in the handle. There are 2 templates to repair broken straps if needed and a new foam sleeve.. Use the bolts, strap and switch from your old broken handle to fit this onto your detector.

NOTE; The handle for the SD/GP detectors up to the GP3000 was discontinued by Minelab several years ago.

Compatibility

SD2000

SD2100

SD2100V2

SD2200

SD2200V2

GP Extreme

GP3000

GP3500

GPX4000

GPX4500

GPX4800

GPX5000