minelab

3011-0283 The GPZ7000 armrest kit contains the GPZ7000 armrest and straps, the lower foot and 2 x fixing screws to attach it. The armrest and strap...

3011-0402 SDC Armrest cover Does the SDC2300 armrest on your detector fold in when you go to put your arm into it? Does it fold in when you wera a ...

3011-0363 This kit contains the Gold Monster armrest and 4 clamps, the lower shaft adaptor and a battery pack for AA batteries. This is a genuine M...

3011-0144 Armrest wear kit Neoprene sleeve, velcro strap set and bolts to fit Eureka Gold, GPX, and Sovereign series metal detectors. This is a gen...

3011-0299 Lithium Ion battery 7.2v 34Wh This is a standard Minelab replacement battery to suit the CTX3030 detectors. This battery can be used on t...

3011-0405 Equinox battery Replacement Lithium ion battery and cap to suit the Equinox series detectors. This is a genuine Minelab product. Please n...

3011-0359 GOLD MONSTER 1000 Replacement or spare battery to suit the GOLD MONSTER 1000 detector. This is a lithium Ion battery pack as per the stan...

3011-0432 GPX6000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPX6000. Item detail is for one battery....

3011-0279 GPZ7000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPZ7000. This is a genuine Minelab spare...

 3011-0404 SDC2300 L/I battery pack Replacement or spare Lithium Ion Minelab batteries pack to suit the newer SDC2300 detectors. This battery pack ...

 3011-0302 SDC2300 batteries Replacement or spare NiMh Minelab batteries (4) to suit the SDC2300 detectors. The positive terminal on these batterie...

8008-0062 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on an SDC2300 when the lever is pushed home. Th...

3011-0246 Pro-Swing bungy This is the repair kit to suit the PRO-SWING 45 harness. It consists of the 2 plastic rods, the velcro on cuff and the bu...

3011-0368 EQUINOX magnetic charging cable to USB Application Charging cable for the Equinox series that magnetically connects to the control box an...

3011-0167 The new style blue Embroidered Minelab cap keeps the sun off. One size fits all with the velcro adjustment band. Why don't you use yours ...

3011-0277 This is a carry bag to suit the GPZ7000 Minelab metal detector. It is larger than the CTX3030 bag and replaces all the previous Minelab b...

3011-0366 12 Volt alligator clip set to round connector to allow charging directly from a 12 volt battery and eliminating any potential issues with...

3011-0210 Large connector Application The car charger plugs into a 12 Volt DC automotive cigarette lighter socket for convenient, mobile charging w...

3011-0339 Charger to suit the GOLD MONSTER 1000, GPX600 and SDC2300 Lithium Ion batteries. Note: The output voltage of this adaptor is 12 volt. DO ...

3011-0203 GPX series Application These are sold out and no longer available from Minelab, but there is a replacement available HERE

3011-0290 BC10 and WM12 This is the cable kit to suit the BC10 charger for the GPZ7000 and the CTX3030 model detectors. The wireless module usb cab...

3011-0128 Charger Base   The battery charger base (BC10) is the item that the mains/12 volt input connects into and allows charging of the GPZ7000 ...

3011-0218 Application Fits GP & SD series metal detectors to charge the gel cell batteries via a 12 volt outlet. The power cable from the machi...

8005-0112 Clamp to suit centre shaft lock nut for the GPX6000. This is a genuine Minelab product.