minelab

3011-0128 Charger Base   The battery charger base (BC10) is the item that the mains/12 volt input connects into and allows charging of the GPZ7000 ...

3011-0427 GPX6000 17"Mono Coil This is the standard coil to suit the GPX6000 Minelab metal detector. The GPX 11" round Mono-loop coil is a great ge...

3011-0427 GPX6000 17"Mono Coil This is the currently largest coil to suit the GPX6000 Minelab metal detector. The GPX 17" x 13" elliptical Mono coi...

3011-0304 Minelab GPZ7000 accessory coil Application Suits the Minelab GPZ7000 only. Use when looking for deeper and larger nuggets in ground that ...

3011-0278 The Minelab GPZ7000 standard 14" x 13"  coil is available as a spare part. Suits the Minelab GPZ7000 only. This is a genuine Minelab spar...

3011-0148 Coil wear kit Contains bolts and shaft rubbers as per the image. This is a genuine Minelab spare part. Compatibility E-TRAC Safari Explor...

3011-0284 Coil wear kit Suits GPZ000 lower shaft. Consists of the rubber washers, bolts and nuts to attach the coil to the lower shaft. This is a g...

3011-0141 Coil wear kit Application Spare parts kit with rubbers, bolts and velcro ties, fits all Minelab metal detectors EXCEPT X-TERRA and FBS se...

3011-0150 Coil wear kit Items in this kit is as per the image and includes shaft bolts, washers and velcro ties. Fits X-TERRA series metal detector...

3011-0101 X-TERRA 18.75 kHz Application Suitable for X-TERRA series metal detectors (except X-TERRA 30). The standard X-TERRA 705 Gold Pack coil is...

 3011-0073  Please note - This coil is no longer a stock item with the advent of the range of aftermarket coils. We can order it in for you. Appli...

3011-0078 Please note - This coil is no longer a stock item with the advent of the range of aftermarket coils. We can order it in for you. Applica...

3011-0115 CTX3030 11" Application The waterproof 11 inch Double-D coil provides good depth and sensitivity for treasure hunting. This is the stanar...

3011-0116 CTX3030 17" Application The waterproof 17 × 13-inch elliptical Double-D coil provides maximum depth for specialised treasure hunting. It ...

3011-0114 CTX3030 6" Some operators are using this coil in trashy areas because the size of it allows for fewer targets under the coil and more acc...

3011-0335 EQUINOX 15" x 12" Some operators are using this coil because the size of it allows for faster ground coverage and better penetration (dep...

3011-0333 EQUINOX 6" Some operators are using this coil in trashy areas because the size of it allows for fewer targets under the coil and more acc...

3011-0168 FBS detectors control box cover. This custom cover is an excellent way to protect your detector from harsh environmental conditions such ...

3011-0292 Crossbar kit This is the crossbar kit to suit the GPZ7000 detector. It can be used with the PRO-SWING 45 harness to make it the same as t...

3011-0192 GPX series Genuine Minelab brand 5 pin curly cord to suit GPX series detectors 4000, 4500 and 5000, 3 metres in length.

3011-0207 SD/GP series Minelab brand 4 pin 3 metre Curly cord to suit SD2000, 2100, 2200, GP Extreme, 3000, 3500. This is a genuine Minelab spare p...

3011-0400 EQUINOX Shaft Kit This shaft kit is a replacement for the EQUINOX 600 and 800 detectors with the benefit that it will fit onto the Minela...

Ferrite 3011-0301 This is a ground balancing aid for the GPZ7000 detector. It is a measured amount of ferrite to allow the detector to ground balan...

8005-0001 Foam sleeve Foam handle sleeve replacement slides over the handle. This is a genuine Minelab spare part. Compatibility Fits all Minelab m...

2008-0005 This is the foot only that is included in the Armrest Kit for the GPZ7000 HERE. The foot, or stand goes below the control box for it to s...

0703-0294 This is the GA10 guide arm retaining clip that hooks into the detector hand-piece to keep the guide arm in place when not in use. It slid...

3011-0294 GA10 attachment kit This is the attachment kit to suit the GA10 guide arm, released with the GPZ7000. The kit contains the plastic attach...

0703-0292 This is the flexible GA10 guide arm attachment piece that comes with the GPZ7000 metal detector. This is the attachment only. The full ki...

3011-0436 GA10 Minelab guide arm that is original equipment with the GPZ7000 metal detector, now suits the GPX6000 as it has an additional adaptor ...

8005-0090 The rubber strap that holds the GA10 guide arm flexible bracket is here. This is a genuine Minelab spare part.

9999-0058 Minelab gloves Protect your hands with this set of digging gloves. These are supplied as a pair and embossed with the Minelab brand.

3011-0327 PRO-GOLD 10" Discover gold the easy way with the Minelab PRO-GOLD range of high quality pans and accessories. This premium panning kit ha...

3011-0326 PRO-GOLD 15" Discover gold the easy way with the Minelab PRO-GOLD range of high quality pans and accessories. This premium panning kit ha...