Shaft Related

0703-0292 This is the flexible GA10 guide arm attachment piece that comes with the GPZ7000 metal detector. This is the attachment only. The full ki...

3011-0436 GA10 Minelab guide arm that is original equipment with the GPZ7000 metal detector, now suits the GPX6000 as it has an additional adaptor ...

8005-0090 The rubber strap that holds the GA10 guide arm flexible bracket is here. This is a genuine Minelab spare part.

AC001Z GPZ7000 Swing Arm This guide arm or swing arm is designed to fit onto the GPZ7000 shaft and allow 2 handed operation of the detector. This c...

AC001X SD/GP/GPX swing arm This guide arm or swing arm is designed to fit onto the SD, GP or GPX series upper shaft and allow 2 handed operation of...

AC001C SDC2300 Swing Arm This guide arm or swing arm is designed to fit onto the SDC2300 shaft and allow 2 handed operation of the detector. This c...

3011-0216 Application Fits GP 3500 and GPX series metal detectors. The switch and loom assembly is available separately HERE. This is a genuine Min...

woodhandle Application Replacement wooden handle for the troublesome plastic original. Uses the existing hardware to attach it, and the original sw...

Replacement handle Application This handle is 3d printed and very tough. The stem is now carbon fibre for a very strong application. It comes with ...

4002-0059 Centre or middle shaft lock nut to suit the GPX6000. This is a genuine Minelab product.

4002-0058 Upper shaft lock nut to suit the GPX6000. This is a genuine Minelab product.

3011-0403 SDC2300 knuckle guard Minelab have produced a coil knuckle protector to prevent wear from the area that the coil swivels at. These are a ...

3011-0282Replacement intermediate (centre) carbon fibre shaft to suit the GPZ7000 metal detector.This is a genuine Minelab spare part.

3011-0130Replacement carbon fibre lower shaft to suit the CTX3030 metal detector. Good to fit to an extra coil for quick changes or as a spare.This...

3011-0401Replacement lower shaft to suit the EQUINOX series metal detectors. Does NOT include lower rubbers.This is a genuine Minelab spare part.

3011-0291 Replacement lower shaft to suit the GPZ7000 metal detector. Includes the rubber washers and bolts. This is a genuine Minelab spare part.

3011-0433 This is the standard Minelab lower shaft that suits the GPX6000 detectors. This can also be used as a lower shaft for the Equinox 700 and...

3011-0172 This is the standard Minelab lower shaft that suits the SD, GP and GPX range of detectors. This is a genuine Minelab spare part. Please n...

3011-0173 Short Fits all X-TERRA Series Detectors. Short version to reduce the maximum detector length. This is a genuine Minelab spare part.

3011-0400 EQUINOX 600/800 Shaft Kit This shaft kit is a replacement for the EQUINOX 600 and 800 detectors with the benefit that it will fit onto th...

3011-0434 GPX6000 Shaft Kit This shaft kit is a replacement for the GPX6000 detectors as standard issue. This is a genuine Minelab spare part. Plea...

8005-0040 Armrest strap 38 mm wide Application  This is the velcro strap to fit many of the Minelab detector armrests and is 38 mm in width. It vel...

8005-0019 Armrest straps Generic armrest straps to suit the earlier Minelab detectors that have a stud lock on one end and a velcro strip at the ot...

9511-0102 Has your ground balance switch died or the green button top piece fallen off. This is the part to replace that. It pushes into the handle...