Products

3011-0403 SDC2300 knuckle guard Minelab have produced a coil knuckle protector to prevent wear from the area that the coil swivels at. These are a ...

3011-0282Replacement intermediate (centre) carbon fibre shaft to suit the GPZ7000 metal detector.This is a genuine Minelab spare part.

3011-0130Replacement carbon fibre lower shaft to suit the CTX3030 metal detector. Good to fit to an extra coil for quick changes or as a spare.This...

3011-0401Replacement lower shaft to suit the EQUINOX series metal detectors. Does NOT include lower rubbers.This is a genuine Minelab spare part.

3011-0291 Replacement lower shaft to suit the GPZ7000 metal detector. Includes the rubber washers and bolts. This is a genuine Minelab spare part.

3011-0433 This is the standard Minelab lower shaft that suits the GPX6000 detectors. This is a genuine Minelab spare part. Please note; Rubber coil...

3011-0172 This is the standard Minelab lower shaft that suits the SD, GP and GPX range of detectors. This is a genuine Minelab spare part. Please n...

3011-0173 Short Fits all X-TERRA Series Detectors. Short version to reduce the maximum detector length. This is a genuine Minelab spare part.

CS12 12 holes/inch This is a Keene Brand stackable sieve manufactured from heavy duty plastic. This sieve will fit into a 20 litre bucket for the g...

CS2 2 holes/inch This is a Keene Brand stackable sieve manufactured from heavy duty plastic. This sieve will fit into a 20 litre bucket for the gem...

CS20 20 holes/inch This is a Keene Brand stackable sieve manufactured from heavy duty plastic. This sieve will fit into a 20 litre bucket for the ...

CS30 30 holes/inch This is a Keene Brand stackable sieve manufactured from heavy duty plastic. This sieve will fit into a 20 litre bucket for the ...

CS4 4 holes/inch This is a Keene Brand stackable sieve manufactured from heavy duty plastic. This sieve will fit into a 20 litre bucket for the gem...

CS8  8 holes/inch This is a Keene Brand stackable sieve manufactured from heavy duty plastic. This sieve will fit into a 20 litre bucket for the ge...

2740000000003 Sieve Set This set of stackable aluminium sieves are 330 mm (13") in diameter and stack together. One sieve has approximately 2.5 mm ...

S01-0001 Replacement Coiltek skidplate to suit their 10" x 5" Gold Extreme SDC2300 coil. This is a genuine Coiltek spare part.

S02-0013 Replacement Coiltek skidplate to suit their 10" x 5" Goldhawk GPX6000 coil. This is a genuine Coiltek spare part.

S01-0002 Replacement Coiltek skidplate to suit their 11" Gold Extreme SDC2300 coil. This is a genuine Coiltek spare part.

S03-0002 Replacement Coiltek skidplate to suit their 11" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.

S03-0003 Replacement Coiltek skidplate to suit their 14" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.

S01-0012 Replacement Coiltek skidplate to suit their 14" x 9" Gold Extreme SDC2300 coil. This is a genuine Coiltek spare part.

S02-0012 Replacement Coiltek skidplate to suit their 14" x 9" Goldhawk GPX6000 coil. This is a genuine Coiltek spare part.

S03-0008 Replacement Coiltek skidplate to suit their 14" x 9" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.

S03-0004 Replacement Coiltek skidplate to suit their 17" x 11" Mono Elite spiral wound coil. This is a genuine Coiltek spare part.