Products

Xceed12x7skid Heavy duty black skidplate for the Nuggetfinder Xceed 12' x 7" coil to suit the GPX6000 detector. Heavy duty skids generally last up ...

3011-0254 Skidplate Suits the SDC2300 8" mono coil. This is a genuine Minelab spare part.

GBS1 Sniffer bottle These squeezable bottles are used to suck up the gold from your pan, or to wash away the black sands and other debris as you pa...

AC004 This is an acoustic reflector for the sound coming from the inbuilt speaker on an SDC2300. It helps direct the sound upward and towards the o...

SPK Single or double This GME external speaker has a correctly wired jack to trigger the inbuilt booster in a GPX 4500/5000 battery, or is used in ...

8005-0040 Armrest strap 38 mm wide Application  This is the velcro strap to fit many of the Minelab detector armrests and is 38 mm in width. It vel...

8005-0019 Armrest straps Generic armrest straps to suit the earlier Minelab detectors that have a stud lock on one end and a velcro strip at the ot...

ST Suction tweezer This suction tweezer is used to assist in picking up the very fine gold from a panning operation. Squeeze the bulb end and relea...

9511-0102 Has your ground balance switch died or the green button top piece fallen off. This is the part to replace that. It pushes into the handle...

M07-0001 white M07-0002 black This is the standard style tape to hold the coil skidplate on in your choice of black or white. Thinner coils such as...

EVO tape Tape to hold the coil skidplate on in the Evolution series of Nuggetfinder coils. This tape is thinner so that it doesn't pucker up around...

1612900 Treasure pouch This is the pouch only. ACCESSORIES SHOWN ARE FOR DEMONSTRATION PURPOSES AND ARE NOT INCLUDED. Great for carrying your treas...

8008-0002 Upper shaft twist lock kit to repair Minelab shafts. This takes the play out of the shaft join when it is tightened. Once assembled, the ...

TygerBlade The Tyger Blade is made from 3mm stainless steel. Large palm plate that allows 2 handed precision plug digging. Media blasted to give a ...

TygerSnake Made from Stainless Steel, Tig Welded, Laser Cut serrations.Designed with a large T-handle that allows the operator to place their body ...

0703-0227 Clip on holder and clip assembly that attaches to the rear of the WM12 wireless module to allow it to clip onto a strap, harness etc. Thi...

3011-0281 WM12 wireless module Suits the GPZ7000 as a replacement for a lost or damaged unit, as a spare for your detector, or alternatively can be...