Sandy Shaft - Upper with compression nut and o-ring

T01-0005

Sandy Shaft SD/GP/GPX

This shaft is a direct replacement on the Minelab SD/GP/GPX detectors and will replace the standard aluminium upper shaft. If you are using large mono coils over 16" in diameter then the coil is able to "sense" the aluminium upper shaft resulting in some performance loss. The larger the coil, the larger the loss may be.

The Sandy Shaft has 6 adjustment holes and is approximately 820 mm long, which is the standard length of the original aluminium shaft. This shaft should be compatible with most lower shafts but it is possible that some might be tight.

Please note; We are able to send this shaft as express post as a stand alone part as it is under 500 grams in weight with packaging. If combined with other items we reserve the right to vary the shipping method to make all items postage costs fair and reasonable.

Length - 820 mm

Outside size - 22.0 mm

Inside size - 19.05 mm

(measurements are approximate)