The GOLD MONSTER 1000 features fully automatic operation and comes with a choice of coils, battery options and shaft configurations. If you're looking for super sensitive gold performance at a great price, then this is the detector you've been waiting for!
- Fully automatic operation
- Extra sensitive 45 kHz VLF performance
- Highly adaptable
- 2 search coils included
- Easy quick start
1. Gold Chance Indicator - High Gold Chance/Low Gold Chance.
2.Detect Modes - Gold (Iron Reject) Deep All-Metal.
3.Sensitivity Options - Manual sensitivity, and two auto options; Auto, and Auto+.
4.Adjustable Volume - Adjust to suit your hearing, with 6 volume levels.
"I found my first nugget within an hour; funnily enough it was in a detector scrape from previous excursions. All up I found many pieces of gold, the deepest being 3 inches in variable hot ground." Jonathan Porter - Professional Gold Prospector, Australia
“I was able to find nine small nuggets (flakes) so easily that it was a bit surprising! Total weight of all nine is 7.8 grains. None were deep, maybe 3–4 cm at most. Just enough however to be just out of reach of the SDC and too small for the GPZ.” Field Tester, NV, USA
Up until now, there has always been a compromise between frequency and sensitivity when optimising detector performance, because lower frequencies are more sensitive to larger gold nuggets and higher frequencies are more sensitive to smaller gold nuggets.
When comparing detectors, the three curves in the diagram represent each detector’s ability to find small gold nuggets of a certain size, at a maximum possible depth. Most detectors will find a very large nugget just beneath the surface, however a detector’s sensitivity to gold determines how many smaller nuggets will ultimately be recovered in difficult (noisy) ground at greater depths.
An 18 kHz detector will normally have a depth advantage on nuggets ≥ 1.0g over a basic mid-frequency detector, and a 71 kHz detector will have a depth advantage on nuggets ≤ 0.1g. The advanced GOLD MONSTER 1000 uses an intermediate 45 kHz frequency AND a high speed 24-bit signal processor. This primary combination greatly boosts sensitivity to gold beyond that of other single frequency VLF detectors over a wide range of nugget sizes, without introducing excess noise and false signals.
The GOLD MONSTER 1000 also has improved ferrous/non-ferrous discrimination and copes better with conductive (salty) soils than higher frequency detectors, making it the perfect choice to maximise your gold recovery!
Automatic noise cancel • Digital electronics • Auto ground balance • Faster processor • Automatic sensitivity
Call us for a package deal on any other items you might require with this detector.
Please select the "FREE" shipping option for this product in checkout.
As express shipping is not available, this item will be posted parcel post with a signature required sticker. A signature is required at delivery, and proof of identification would be requested before delivery of goods.