Minelab

3011-0283 The GPZ7000 armrest kit contains the GPZ7000 armrest and straps, the lower foot and 2 x fixing screws to attach it. This is a genuine Min...

3011-0402 SDC Armrest cover Does the SDC2300 armrest on your detector fold in when you go to put your arm into it? Does it fold in when you wera a ...

3011-0143 Armrest ears Application Pair of aluminium ears that go onto the shaft to fit Eureka Gold, SD, GP, GPX and Sovereign series metal detecto...

3011-0144 Armrest wear kit Application   Neoprene sleeve, velcro strap set and bolts to fit Eureka Gold, GPX, and Sovereign series metal detectors....

3011-0202 Minelab harness The GP style harness pictured has been replaced by the GPX5000 unit which has a 120mm wide padded belt, that goes around ...

3011-0245 Pro-Swing harness Designed for ultimate convenience and functionality. Minelab’s innovative W8 distribution system and specialist feature...

3011-0117 Lithium Ion battery 7.2v 34Wh This is a standard Minelab replacement battery to suit the CTX3030 detectors. This battery can be used on t...

3011-0209 FBS series 1800mAh replacement Minelab battery. Application. Fits FBS series metal detectors, Safari, Explorer SE pro and E-TRAC. Compati...

3011-0217 NiMH Battery Fits Excalibur series metal detectors (except the original Excalibur). Clips onto the detector and connects via the cable. T...

3011-0359 GOLD MONSTER 1000 Replacement or spare battery to suit the GOLD MONSTER 1000 detector. This is a lithium Ion battery pack as per the stan...

3011-0227 GPX series battery Replacement battery for the GPX range of detectors. This battery has the inbuilt booster that allows a speaker or set ...

3011-0279 GPZ7000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPZ7000. This is a genuine Minelab spare...

3011-0432 GPX6000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPX6000. Item detail is for one battery....

 3011-0404 SDC2300 L/I battery pack Replacement or spare Lithium Ion Minelab batteries pack to suit the newer SDC2300 detectors. This battery pack ...

 3011-0302 SDC2300 batteries Replacement or spare NiMh Minelab batteries (4) to suit the SDC2300 detectors. The positive terminal on these batterie...

3011-0117 AA battery holder This is a Minelab replacement battery holder to suit the CTX3030 detectors. Application Forgotten to charge your batter...

3011-0170 AA battery holder FBS Battery holder to suit AA batteries as a spare or emergency replacement for the detectors below. Application Fits F...

3011-0171 AA battery holder Eureka Gold Application Fits Sovereign GT and Eureka Gold. Also fits Sovereign Elite and Musketeer Advantage. Compatibl...

8008-0056 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on a GPZ7000 when the lever is pushed home. The...

8008-0062 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on an SDC2300 when the lever is pushed home. Th...

3011-0029 Black plastic bolt 2" long x 1/4" diameter. Suits Minelab coils and others. This is a genuine Minelab spare part.

3011-0145 Standard bungy This is the heavy duty Minelab bungee cord featuring a thicker 6mm cord. This is now part of the Bungy Kit which includes ...

3011-0246 Pro-Swing bungy This is the repair kit to suit the PRO-SWING 45 harness. It consists of the 2 plastic rods, the velcro on cuff and the bu...

67-90405 USB charging cable Application  This cable connects to the USB port in the BC10 battery charger base and the other end connects into the W...

3011-0368 EQUINOX magnetic charging cable to USB Application Charging cable for the Equinox series that magnetically connects to the control box an...

3011-0167 The Navy Blue Embroidered Minelab cap keeps the sun off. One size fits all with the adjustment band. Why don't you use yours as a stateme...

3011-0277 This is a carry bag to suit the GPZ7000 Minelab metal detector. It is larger than the CTX3030 bag and replaces all the previous Minelab b...

3011-0257 Suitable for SDC 2300. Provides convenient transport and storage for your detecting essentials. This bag is approximately 400 mm x 200 mm...

0302-0082 12 volt charger Issued to suit the CTX3030 and GPZ7000 charger bases, this adaptor will also suit the Gold Monster 1000 and both SDC2300 ...

3011-0211 Small connector Designed to suit 12 volt cigarette lighter style sockets, this charger allows you to recharge your E-TRAC, Eureka Gold, S...

3011-0234 Small connector Application 240 volt mains charger. Fits Eureka Gold, Safari, Explorer SE Pro, E-TRAC and Sovereign GT. Also suitable for...

3011-0210 Large connector Application The car charger plugs into a 12 Volt DC automotive cigarette lighter socket for convenient, mobile charging w...

3011-0235 Large connector Application Fits Excalibur series metal detectors (except the original Excalibur). Also fits older Sovereign, Musketeer a...

3011-0339 Charger to suit the GOLD MONSTER 1000, GPX600 and SDC2300 Lithium Ion batteries. Note: The output voltage of this adaptor is 12 volt. DO ...

3011-0169 GPX series Application The car charger plugs into a 12 Volt DC automotive cigarette lighter socket for convenient, mobile charging when a...

3011-0203 GPX series Application Universal voltage, fits all GPX series metal detectors. Use the correct adaptor plug for your country. Compatible ...

3011-0290 BC10 and WM12 This is the cable kit to suit the BC10 charger for the GPZ7000 and the CTX3030 model detectors. The wireless module usb cab...

3011-0128 GPZ7000 CTX3030 The battery charger base (BC10) is the item that the mains/12 volt input connects into and allows charging of the GPZ7000...

3011-0218 Application Fits GP & SD series metal detectors to charge the gell cell batteries via a 12 volt outlet. The power cable from the mach...

3011-0427 GPX6000 17"Mono Coil This is the currently largest coil to suit the GPX6000 Minelab metal detector. The GPX 17" x 13" elliptical Mono coi...

3011-0304 Minelab GPZ7000 accessory coil Application Suits the Minelab GPZ7000 only. Use when looking for deeper and larger nuggets in ground that ...

3011-0278 The Minelab GPZ7000 standard 14" x 13"  coil is available as a spare part Application Suits the Minelab GPZ7000 only Compatible Metal Det...

3011-0148 Coil wear kit Application Fits E-TRAC, Safari, Quattro MP and Explorer series metal detectors. Compatible Metal Detectors E-TRAC Safari E...

3011-0284 Coil wear kit Suits GPZ000 lower shaft. Consists of the rubber washers, bolts and nuts to attach the coil to the lower shaft. This is a g...

3011-0141 Coil wear kit Application Fits all Minelab metal detectors EXCEPT X-TERRA and FBS series. Compatible Metal Detectors GPX 5000 GPX 4800 GP...

3011-0150 Coil wear kit Application Fits X-TERRA series metal detectors. Compatible Metal Detectors X-TERRA 705 Gold Pack X-TERRA 705 X-TERRA 505 X...