Products

MD16 Made by Double D Leather, this is an angled pick holder that slides onto a belt. The holder houses the pick at an angle to reduce the trip haz...

MD17 This is an angled pick holder that clips over or onto a harness. The later Minelab harness with the padded waist belt stops the clips digging ...

3011-0283 The GPZ7000 armrest kit contains the GPZ7000 armrest and straps, the lower foot and 2 x fixing screws to attach it. This is a genuine Min...

GPZAC GPZ7000 armrest cover. This neoprene cover is designed to fit the GPZ7000 armrest and still utilise the velcro arm straps. It fits over the a...

3011-0402 SDC Armrest cover Does the SDC2300 armrest on your detector fold in when you go to put your arm into it? Does it fold in when you wera a ...

3011-0143 Armrest ears Application Pair of aluminium ears that go onto the shaft to fit Eureka Gold, SD, GP, GPX and Sovereign series metal detecto...

3011-0144 Armrest wear kit Application   Neoprene sleeve, velcro strap set and bolts to fit Eureka Gold, GPX, and Sovereign series metal detectors....

ATX packages Note: This metal detector will be posted with a signature delivery sticker. A signature is required at delivery, and proof of identif...

3011-0202 Minelab harness The GP style harness pictured has been replaced by the GPX5000 unit which has a 120mm wide padded belt, that goes around ...

3011-0245 Pro-Swing harness Designed for ultimate convenience and functionality. Minelab’s innovative W8 distribution system and specialist feature...

3011-0117 Lithium Ion battery 7.2v 34Wh This is a standard Minelab replacement battery to suit the CTX3030 detectors. This battery can be used on t...

3011-0209 FBS series 1800mAh replacement Minelab battery. Application. Fits FBS series metal detectors, Safari, Explorer SE pro and E-TRAC. Compati...

3011-0217 NiMH Battery Fits Excalibur series metal detectors (except the original Excalibur). Clips onto the detector and connects via the cable. T...

B01-0007 This Coiltek 6 volt battery is the 15aH dome top gell cell that was standard issue for the GP series detectors and previous units. Older S...

3011-0359 GOLD MONSTER 1000 Replacement or spare battery to suit the GOLD MONSTER 1000 detector. This is a lithium Ion battery pack as per the stan...

3011-0227 GPX series battery Replacement battery for the GPX range of detectors. This battery has the inbuilt booster that allows a speaker or set ...

3011-0279 GPZ7000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPZ7000. This is a genuine Minelab spare...

3011-0432 GPX6000 battery This is the replacement or spare Minelab brand Lithium Ion battery that fits the GPX6000. Item detail is for one battery....

 3011-0404 SDC2300 L/I battery pack Replacement or spare Lithium Ion Minelab batteries pack to suit the newer SDC2300 detectors. This battery pack ...

 3011-0302 SDC2300 batteries Replacement or spare NiMh Minelab batteries (4) to suit the SDC2300 detectors. The positive terminal on these batterie...

3011-0117 AA battery holder This is a Minelab replacement battery holder to suit the CTX3030 detectors. Application Forgotten to charge your batter...

3011-0170 AA battery holder FBS Battery holder to suit AA batteries as a spare or emergency replacement for the detectors below. Application Fits F...

3011-0171 AA battery holder Eureka Gold Application Fits Sovereign GT and Eureka Gold. Also fits Sovereign Elite and Musketeer Advantage. Compatibl...

8008-0056 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on a GPZ7000 when the lever is pushed home. The...

8008-0062 This pressure block with co-mould (rubber pad) is the item that locks the shafts together on an SDC2300 when the lever is pushed home. Th...

N01-0002 Black or white depending on supply Heavy duty coil bolt for larger coils. 8 mm in diameter x 50 mm long. If your larger coil has trouble s...

3011-0029 Black plastic bolt 2" long x 1/4" diameter. Suits Minelab coils and others. This is a genuine Minelab spare part.

Australias Gold Rushes is a collection of fascinating stories about Australias various gold rushes written by Robert Coupe who is an Australian aut...

1509600 Garrett "The Sport of Coin Hunting" was written by the late Charles Garrett, and this pocket size book deals with how to find coins with a ...

FFG Currently out of print for an indefinite period. Fists full of Gold is full of practical information on hunting for gold with techniques for wo...

Written by Joseph F Petrala Recent scientific studies confirm that early miners only scratched the surface and that 75 - 85% of the gold remains in...

1505470 The art of gold panning as explained by Roy Lagal. NOTE; These books are being phased out by Garrett, so best get one soon if you want it.

1509400 INTRODUCTION There is no deep mystery to prospecting for gold. The precious metal has been a subject of man’s striving since the dawn of ti...

Written by Ian Idriess the first edition of 2000 copies published in March 1931. Ion Idriess (1889-1979) is one of Australias best-loved writers, w...

Dealing with the Wild Days of the Palmer River Gold Rush and written by Hector Holthouse."What with cannibal blacks, pig-tailed Chinamen in thousan...

The ultimate A-Z guide revealling everything you need to know to become a metal detecting expert. From quick-start tips for novices to insider secr...

Booty Booster Options The Booty booster is a reasonably new item and consists of a booster, curly cord and a 9 volt battery. The booster operates f...

The Booty booster is a reasonably new item and consists of a booster, curly cord and a 9 volt battery, along with a bypass switch on this model to ...

MD14-6 Quick adjustment using the slot in the hook makes this bungy cable better than the original. It connects to the original Minelab bow knuckle...

MD14-8 Quick adjustment using the slot in the hook makes this bungy cable better than the original. It connects to the original Minelab bow knuckle...

3011-0145 Standard bungy This is the heavy duty Minelab bungee cord featuring a thicker 6mm cord. This is now part of the Bungy Kit which includes ...

3011-0246 Pro-Swing bungy This is the repair kit to suit the PRO-SWING 45 harness. It consists of the 2 plastic rods, the velcro on cuff and the bu...

BNG Qweegee This heavy duty Bungee allows for fast adjustment of your Bungee tension for varying terrains. The (trademark) QWEEGEE clamps onto the ...

MDGPZBC GPZ7000 Quick adjustment using the slot in the hook makes this bungy cable a quick adjustment. It connects to the GPZ7000 using the velcro ...

MD14.5 SDC2300 Quick adjustment using the slot in the hook and the velcro cuff makes this bungy cable suit the SDC2300. It connects to the shaft wi...

Universal hip stick This adjustable bungy strut has 6 different placement holes to adjust from 33 cm to 57 cm (13"- 22"). It is designed to go over...

67-90405 USB charging cable Application  This cable connects to the USB port in the BC10 battery charger base and the other end connects into the W...

3011-0368 EQUINOX magnetic charging cable to USB Application Charging cable for the Equinox series that magnetically connects to the control box an...